1/15/2024 0 Comments Manual kinetico model 60![]() ![]() You might also "entice" him by telling him that when you get the unit in you'll try to have him come over and give it a checkup or service. CP Filter Series Technical Manual 8 System Specifications Model CP213f OD Design Specifications Service Flow Rate - 15 psid (1 bar) 15.0 gpm 57.0 Lpm Service Flow Rate - 30 psid (2 bar) 20.0 gpm 76.0 Lpm Pressure Range 25 - 125 psi Dynamic Pressure 1.7 - 8.6 bar Dynamic Pressure Temperature Range 35- 120 F 1. ![]() Probably your best bet is to find a Kinetico dealer and see if he has a manual and can help you out on operation and hook-up. Depending on the age of the unit, they may need the resin beads replaced. The resin bead tanks will have water that's being softened in them, but they're not that big and shouldn't need to be "drained". The salt, or brine, tank, only has some water in it during the regeneration process and the rest of the time just salt. You shouldn't have to "drain" anything, tankwise. Now most companies offer a few units that regenerate as required. At the time they were the only ones that actually measured how much water went through them and regenerated accordingly. IIRC, the big advantage to the Kinetico is they have two resin bead tanks and one salt tank and they switch from one bead tank to the other so even while regenerating you still have a normal supply of soft water. I've looked into Kinetico and they seem to be good units but now there are several that also regenerate on demand. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |